Avatar
Home » How Much Should You Let Your Faucet Drip to Prevent Freezing in Oak Ridge?

How Much Should You Let Your Faucet Drip to Prevent Freezing in Oak Ridge?

fix frozen pipes with Tennessee Standard Plumbing in Oak Ridge

Homeowners begin the annual task of preparing their homes for the cold as winter arrives in Tennessee and Oak Ridge experiences its typical chill. 

One of the most popular tips for preventing pipe freezing is to let your faucets drip. However, more questions are frequently raised by this straightforward recommendation: How much should it drip? Which faucets should I use? Is it really that important? 

The short answer is yes: a dripping faucet can help stop a pipe from bursting, and getting the drip just right is important for both saving water and making it work. If you do run into trouble, you can always fix frozen pipes with Tennessee Standard Plumbing in Oak Ridge.

Why a Drip is Your First Line of Defense

Letting a faucet drip helps prevent pipes from freezing in two important ways. 

First, it keeps the water in the pipes in constant motion. Moving water freezes at a lower temperature than standing water, so even a small drip can be enough to keep the water from turning to ice. 

Second, and more importantly, a dripping faucet provides a crucial pressure relief valve for your entire plumbing system. When water freezes, it expands with incredible force. If the pipe is closed off at both ends, this expansion has nowhere to go, and the pressure can easily build up to the point where the pipe ruptures. 

Letting your faucet open, even just a drip, lets this pressure escape and reduces the risk of a burst pipe.

Finding the Goldilocks Drip: Not Too Much, Not Too Little

The ideal drip is a steady, consistent flow, but it doesn’t need to be a running stream. Most plumbing experts recommend a drip rate of about 5-10 drips per minute. A good visual guide is to aim for a stream of water about the width of a pencil lead. This is enough to keep the water moving and relieve pressure without wasting a significant amount of water. 

It’s a typical misconception that you need to have your faucet drip faster or slower, but a steady, slow drip is all that’s needed to be effective.

Which Faucets Should You Let Drip?

You don’t need to turn all the faucets in your house into dripping taps. The goal is to target the faucets connected to the pipes that are most susceptible to freezing. These are typically the pipes located in unheated or poorly insulated areas of your home, such as:

  • Pipes on exterior walls: Faucets in kitchens and bathrooms with sinks on outside walls are prime candidates for dripping.
  • Pipes in unheated basements or crawl spaces: If you have plumbing running through these areas, dripping a faucet on the lowest level of your home can help protect them.
  • Pipes in garages: If your home has a utility sink or other plumbing in the garage, be sure to let that faucet drip during a cold snap.

When choosing which faucet to drip, select the one that is farthest from where the water main enters your home. This will ensure that the entire length of the pipe is protected by the moving water.

Hot or Cold? The Great Debate

Some people argue about whether to drip hot or cold water, but most people agree that dripping cold water is enough. The main goal is to keep the water moving, and the cold water line is usually the one that is most likely to freeze. 

If you have a single-handle faucet, though, you can set it to a lukewarm temperature to make sure that both the hot and cold lines are getting some flow.

Other Important Ways to Prevent Problems Besides the Drip

While dripping your faucets is a critical step, it should be part of a comprehensive winterization plan. Here are some other essential tips for Oak Ridge homeowners:

  • Insulate Pipes: Wrap any exposed pipes in your basement, crawl space, or attic with foam insulation sleeves.
  • Seal Air Leaks: Use caulk or spray foam to seal any cracks or openings in your foundation or around windows and doors to prevent cold air from reaching your pipes.
  • Open Cabinet Doors: Open the doors to your kitchen and bathroom sink cabinets to allow the warmer air from your home to circulate around the pipes.
  • Disconnect Outdoor Hoses: Drain and disconnect all garden hoses from your outdoor spigots to prevent them from freezing and causing the pipe to burst inside your wall.

A Simple Step for Significant Protection

In Oak Ridge, a winter freeze is a certainty. By taking the simple, proactive step of letting your faucets drip, you can protect your home from the devastating damage of a burst pipe. 

Remember to aim for a steady drip, about the width of a pencil lead, from the faucets connected to your most vulnerable pipes. It’s a small action that can save you a significant amount of money and stress when the temperatures drop.

Tennessee Standard Plumbing and Drain

136 S Illinois Ave Suite 210 C, Oak Ridge, TN 37830

Phone: (865) 344-8105

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top